RAMS, CPP & Site Documents for Rendering Contractors
Rendering means working from scaffolding all day, mixing cementitious materials, and handling chemical additives. Your RAMS need to cover working at height, cement burns, and substance exposure.
No card needed · Used by UK rendering contractors · CDM 2015 compliant
Built for Rendering Contractors
Real work, real hazards. Here are examples of what The Site Book creates RAMS for:
Sand and cement rendering
Traditional render application to masonry walls — covers scaffolding access, cement mixing, manual handling of sand and cement bags, and weather-dependent scheduling.
Monocouche and through-colour render
Factory-mixed one-coat render systems — covers scaffold access, mechanical mixing, application by hand or spray, and product-specific COSHH requirements.
Silicone and acrylic thin-coat render
Thin-coat finish coats over external wall insulation (EWI) — covers chemical handling, primer application, scaffold access, and coordination with insulation contractors.
Lime render and heritage plastering
Lime putty or hydraulic lime render on listed and traditional buildings — covers quicklime handling (highly caustic), scaffold access, and extended curing requirements.
What You Get
Job-specific RAMS
Describe your job and get professional risk assessments covering working at height and other trade-specific hazards.
Construction Phase Plans
CDM 2015 compliant CPPs created from your job description. Covers management arrangements, risk control, welfare, and emergency procedures.
COSHH Assessments
Smart substance search and SDS upload. Pre-loaded with common renderer substances like portland cement, hydrated lime (caustic), quicklime (highly caustic), silicone resins, acrylic polymers, bonding agents.
Site Inductions
Digital induction sign-offs for every worker on site. Linked to your CPP and site rules. Works on any phone or tablet.
Worker & subcontractor tracking
Track certifications, insurance, and CSCS cards. Get alerts before documents expire. One view for all your workers.
Digital document sharing
Share your full document pack with clients, principal contractors, or inspectors via a secure read-only link. No login needed on their end.
Common Hazards We Cover
These are the real risks rendering contractors face on site every day. Your RAMS will address each one with specific control measures.
- Working at height — rendering is almost always done from scaffolding or mobile towers, often for sustained periods across entire elevations
- Cement burns — wet cement, render mix, and lime are highly alkaline and cause chemical burns that may not be felt until hours after contact
- Respiratory irritation — mixing dry render, cutting back, and sanding generates fine dust that irritates the lungs
- Manual handling — bags of cement, sand, and render mix weigh 25kg each and are repeatedly lifted, carried, and hoisted up scaffolding
- Scaffold safety — renderers rely on scaffolding for the full duration of the job and are exposed to risks from poorly maintained or overloaded platforms
- Chemical exposure from additives — bonding agents, primers, and waterproofers contain solvents and irritants requiring COSHH assessment
Key Regulations & Standards
Work at Height Regulations 2005 and COSHH Regulations 2002
Rendering contractors must comply with the Work at Height Regulations 2005 for all scaffold-based work, including scaffold inspection before use and load limits. COSHH Regulations require assessment of cement and lime exposure, with controls for skin protection and dust inhalation. Lime render work — particularly with quicklime — requires specific controls for severe chemical burn risk. CDM 2015 applies to all rendering work, and manual handling assessments are required under the Manual Handling Operations Regulations 1992.
Frequently Asked Questions
- Do rendering contractors need RAMS?
- Yes. Rendering involves sustained working at height from scaffolding, cement and lime handling (chemical burn risk), dust exposure, and heavy manual handling — all significant risk activities under CDM 2015. Your RAMS should cover scaffold access procedures, COSHH assessments for render products, skin protection measures, and manual handling controls.
- How long does it take to create RAMS for rendering work?
- Under 5 minutes with The Site Book. Describe the job — for example, 'sand and cement render to front and side elevations of a two-storey house' — and the AI generates RAMS covering scaffold access, cement burn prevention, dust control, manual handling, and weather precautions, specific to your project.
- Does The Site Book cover lime render and heritage work?
- Yes. The Site Book generates RAMS that cover the specific hazards of lime render, including the severe caustic burn risk from quicklime and hydraulic lime. It references COSHH requirements for lime handling, the need for full skin and eye protection, and first aid procedures for lime burns — which differ from standard cement burn treatment.
Ready to stop writing RAMS by hand?
Describe your job, get professional RAMS, CPP, and COSHH assessments in minutes. Free trial — no credit card required.