RAMS & CPP for Electrical Work
What compliance documents you need for electrical installations, rewiring, and consumer unit work — and how The Site Book handles it for you.
What compliance do you need?
Electrical work carries inherent risks that demand proper planning and documentation. Whether you're doing a full rewire, swapping a consumer unit, or running new circuits on a construction site, CDM 2015 applies alongside the Electricity at Work Regulations 1989 and BS 7671.
Do you need a CPP?
Yes. A Construction Phase Plan is required for all construction projects under CDM 2015. For electrical work, your CPP should cover isolation procedures, safe systems of work for live working (where unavoidable), coordination with other trades, and emergency procedures for electric shock.
Do you need RAMS?
RAMS are strongly recommended for all electrical work. They're essential on commercial and industrial sites, and most principal contractors will require them. Even on domestic jobs, RAMS demonstrate you've planned the work safely — covering isolation, testing, and emergency procedures.
Common hazards
- Electric shock from live circuits and accidental contact
- Arc flash from short circuits and fault conditions
- Working at height to access distribution boards and cable routes
- Fire risk from faulty connections and overloaded circuits
- Asbestos disturbance when chasing cables in older properties
- Working in confined spaces (risers, ceiling voids, under floors)
- Manual handling of cable drums and heavy equipment
How The Site Book handles it
Describe your job — "full rewire, 3-bed Victorian terrace" — and The Site Book creates your RAMS and CPP automatically. It identifies electrical-specific hazards including shock risk, arc flash, asbestos disturbance, and working at height in cable routes.
Frequently asked questions
- Do electricians need RAMS?
- RAMS are strongly recommended for electrical work, especially for rewires, consumer unit replacements, and any work on commercial or industrial sites. Most principal contractors and clients will require RAMS before allowing electrical work to proceed. They demonstrate you've thought through the risks of working with live circuits, at height, and in confined spaces.
- What regulations apply to electrical work on construction sites?
- Electrical work on construction sites must comply with BS 7671 (IET Wiring Regulations), the Electricity at Work Regulations 1989, and CDM 2015. Domestic work must also comply with Part P of the Building Regulations. Work must be carried out by a competent person, and notification to Building Control is required for certain types of work.
- Do I need a CPP for an electrical job?
- Yes. CDM 2015 requires a Construction Phase Plan for all construction projects, including electrical installations. Your CPP should cover isolation procedures, how you'll manage the risks of working near live circuits, and coordination with other trades if you're part of a larger project.
Get your electrical docs sorted
Describe your job, get professional RAMS and CPP in minutes. Free trial — no credit card required.