Skip to main content
Start your first project →
← All use cases

RAMS & CPP for Plastering & Rendering

What compliance documents you need for plastering, rendering, and drylining — and how The Site Book handles it for you.

Written by Nicola Dobbie, Founder and CEO, The Site BookLast reviewed

TL;DR

  • CPP: Required — CDM 2015 applies to every construction project.
  • RAMS: Recommended — commonly required on commercial sites and housing association contracts.
  • Key hazards: Chemical burns from lime-based renders, dermatitis from prolonged wet cement contact, and silica dust from sanding or cutting plasterboard.

What compliance do you need?

Plastering might seem straightforward, but it carries real health risks — from dermatitis and dust inhalation to manual handling injuries and working at height. CDM 2015 applies to all plastering work, whether you're skimming a ceiling in a house or rendering the outside of a commercial building.

Do you need a CPP?

Yes. Every construction project requires a Construction Phase Plan. If you're a subcontractor on a site with more than one contractor, the principal contractor produces the CPP under regulation 12(1) — but you'll still need RAMS for your specific activities. On a standalone domestic plastering job where you are the only contractor, the client's duties in regulations 4(1) to (7) and 6 pass to yourself.

Do you need RAMS?

RAMS are recommended for plastering work, and they're often required on commercial sites and housing association contracts. They're particularly important when working at height, using lime-based products, or when your work creates significant dust. See controlling dust on a small site for controls to write into the RAMS.

Common hazards

  • Dermatitis from wet work and cement-based products
  • Respiratory issues from plaster dust and silica
  • Chemical burns from lime-based renders and plasters
  • Working at height on scaffolding and hop-ups
  • Manual handling of plaster bags, boards, and mixing equipment
  • Musculoskeletal injuries from repetitive overhead work
  • Slips and trips from wet floors and spilt materials
  • Eye injuries from splashes and dust

How The Site Book handles it

Describe your job — "external render, 3-storey block of flats" — and The Site Book creates your RAMS and CPP automatically. It identifies plastering-specific hazards including COSHH requirements for lime products, dust control, and working at height provisions.

Frequently asked questions

Do plasterers need RAMS?
RAMS are recommended for plastering work, especially on commercial sites, housing association contracts, and larger domestic projects. They're particularly important when working at height on scaffolding or towers, when mixing materials that create dust, and when working with lime-based products that can cause chemical burns.
What are the main health risks for plasterers?
The main health risks include dermatitis from prolonged wet work and cement-based products, respiratory issues from plaster dust and silica (especially when sanding or cutting plasterboard), musculoskeletal injuries from repetitive overhead work and manual handling, and chemical burns from lime-based renders and plasters.
Do I need a CPP for a plastering job?
Yes. CDM 2015 requires a Construction Phase Plan for all construction projects. If you're a subcontractor on a project with more than one contractor, the principal contractor produces the CPP under regulation 12(1) — but you may still need to provide your own RAMS. On a standalone domestic job where you are the only contractor, the client's duties in regulations 4(1) to (7) and 6 pass to you, and you draw up the CPP under regulation 15(5).

What's included at each tier

Starter

£0
  • Risk Assessments (RAMS)
  • Construction Phase Plans (CPP)
  • Site inductions
  • Worker document signing (no per-signature charge)

Pro

£39/mo or £360/yr
  • Risk Assessments (RAMS)
  • Construction Phase Plans (CPP)
  • Site inductions
  • COSHH assessments (standalone doc, SDS upload, site-specific register)
  • Worker cert tracking and expiry alerts
  • Right-to-work evidence records
  • Subcontractor tracking
  • Toolbox talks
  • Worker document signing (no per-signature charge)
  • Integrations (Drive, Dropbox, OneDrive, Xero, Zapier)

Advanced

£99/mo
  • Risk Assessments (RAMS)
  • Construction Phase Plans (CPP)
  • Site inductions
  • COSHH assessments (standalone doc, SDS upload, site-specific register)
  • Worker cert tracking and expiry alerts
  • Right-to-work evidence records
  • Subcontractor tracking
  • Toolbox talks
  • Worker document signing (no per-signature charge)
  • Integrations (Drive, Dropbox, OneDrive, Xero, Zapier)
  • Up to 10 internal team logins
  • People who can sign in and out on site, across your account
  • Projects with Site Access switched on
  • Site attendance check-in/check-out
  • Multilingual worker inductions (9 languages)
  • Plant & equipment register with project assignment, certificates, services and defects

Business

£199/mo
  • Risk Assessments (RAMS)
  • Construction Phase Plans (CPP)
  • Site inductions
  • COSHH assessments (standalone doc, SDS upload, site-specific register)
  • Worker cert tracking and expiry alerts
  • Right-to-work evidence records
  • Subcontractor tracking
  • Toolbox talks
  • Worker document signing (no per-signature charge)
  • Integrations (Drive, Dropbox, OneDrive, Xero, Zapier)
  • Send issued project PDFs to Autodesk Forma
  • Up to 10 internal team logins
  • Site Supervisor: a field-only login for whoever runs the site
  • People who can sign in and out on site, across your account
  • Projects with Site Access switched on
  • Site attendance check-in/check-out
  • Multilingual worker inductions (9 languages)
  • Optional 4-digit PIN for shared-link document sign-off
  • Plant & equipment register with project assignment, certificates, services and defects
  • Slack Site Ready readiness checks

Site Control

£395/site/mo
  • Risk Assessments (RAMS)
  • Construction Phase Plans (CPP)
  • Site inductions
  • COSHH assessments (standalone doc, SDS upload, site-specific register)
  • Worker cert tracking and expiry alerts
  • Right-to-work evidence records
  • Subcontractor tracking
  • Toolbox talks
  • Worker document signing (no per-signature charge)
  • Integrations (Drive, Dropbox, OneDrive, Xero, Zapier)
  • Send issued project PDFs to Autodesk Forma
  • Up to 10 internal team logins
  • Site Supervisor: a field-only login for whoever runs the site
  • People who can sign in and out on site, across your account
  • Projects with Site Access switched on
  • Site attendance check-in/check-out
  • Multilingual worker inductions (9 languages)
  • Optional 4-digit PIN for shared-link document sign-off
  • Plant & equipment register with project assignment, certificates, services and defects
  • Slack Site Ready readiness checks
  • Permanent entrance QR: guest sign-in and contractor self-join
  • CSCS credential capture, review and expiry alerts
  • Digital induction gating before check-in
  • Live sign-in register, attendance and audit-grade exports
  • Single sign-on (SSO) with Okta or Microsoft Entra
  • Public REST API with scoped account keys
  • Signed real-time webhooks into your own systems

Running live sites with subcontractors? Site Control is the per-site enterprise tier above Business — entrance QR sign-in, CSCS checks, induction gating, live attendance and audit-grade exports. £395 per site per month. Unlimited workers, no setup fee.

Where it helps and where it doesn't

Pros

  • Stilt-work and tower-scaffold controls pre-filled
  • COSHH for plaster, bonding, and finishing compounds ready to include
  • Dust-from-sanding RPE guidance baked into method statements
  • Manual-handling of bags and boards referenced in every RAMS

Cons

  • No crystalline-silica monitoring log generation
  • EH40 workplace exposure limits not auto-applied to plaster dust
  • Lime-render specific COSHH entries are manual uploads only

Why The Site Book

  • UK construction compliance tool that ships RAMS + CPP + COSHH + inductions (readable and acknowledgeable in 9 worker languages on Business, with the language audit-recorded) + worker sign-off, including optional 4-digit shared-link PIN evidence on Business, plus site attendance, portal users, site files, document reviews, subcontractor evidence and inspections/actions.
  • Generate a site-specific RAMS first draft from a natural-language brief, ready for competent-person review - not a template library you hand-fill.
  • Controlled document workflow without an enterprise contract: version history and a recorded issue confirmation before a document is shared with a client or downloaded in the app on every plan, re-sign on revision with superseded signatures preserved plus PCPP import, cert tracking and document checking from the £39/month Pro plan - and on Business, optional named-approver routing (a designated approver accepts or rejects each version, with recorded reasons, before it can be issued) plus client approve/reject/request-changes via share links.
  • Transparent pricing: Starter £0, Pro £39/month or £360/year, Business £199/month with 10 management logins and 50 people who can sign in on site (more available). Worker document signing has no per-signature charge, and adding workers to projects never uses a sign-in place.
  • Build RAMS for any trade - add your own work types and method statements alongside the built-in library, reusable across projects, including a ready-made Commercial Solar PV group. Save a finished job as a reusable project template, or clone it, so the next job of the same shape starts from your own setup.
  • COSHH goes deep: a standalone COSHH assessment document, upload-a-Safety-Data-Sheet extraction, a site-specific substance register and an expert-reviewed library - plus per-worker RAMS sign-off and a one-click Audit Pack covering documents, sign-offs, worker evidence, attendance, incidents, COSHH, permits and up to the latest 500 live Site Diary entries.

Get your plastering docs sorted

Describe your job, get professional RAMS and CPP. No credit card required.